Pneumatic Parts AC2000-02 Air Filter Pressure Regulator FRL Combination With The Auto Drain Unit
Selection Attention 1. How to choose the filter according to the amount of flow? Select the appropriate flow rate according to the air consumption of the downstream equipment. Generally, we choose a filter that is slightly larger than the actual air consumption to avoid insufficient air volume and affect the operation of the equipment.There is no need to select a filter with an excessive flow rate, which will cause waste. (Refer to the flow table below for the specific flow of the product) Air source processor model Interface thread Flow AC2000/AFC2000 1/4 =2″ 500L/min AR/AFR/AF/AL2000 1/4 =2″ 500L/min BC/BFC/BF/BR/BFR/BL2000 1/4 =2″ 2000L/min BC/BFC/BF/BR/BFR/BL3000 3/8=3″ 3000L/min BC/BFC/BF/BR/BFR/BL4000 1/2=4″ 4000L/min 2. How to choose the filter accuracy of the filter element? The pore diameter of the filter element of the filter determines the filtration accuracy of the filter. Because the downstream equipment has different requirements for the quality of the gas source. For example, metallurgy, steel and other industries do not have high requirements for gas quality, so you can choose a filter with a larger filter pore size. However, industries such as medicine and...
